REMOVER PO4&SIO2 POND
Resin to eliminate Phosphates and Silicates
RESIN FOR THE ELIMINATION OF PHOSPHATES AND SILICATES
Phosphorous (P) is an element which is present in ponds in various forms, but mainly as a botanical phosphate, which constitutes a primary source of nutrition for algae. High concentrations of phosphates, in particular, intervene positively on the metabolism of green...
RESIN FOR THE ELIMINATION OF PHOSPHATES AND SILICATES
Phosphorous (P) is an element which is present in ponds in various forms, but mainly as a botanical phosphate, which constitutes a primary source of nutrition for algae. High concentrations of phosphates, in particular, intervene positively on the metabolism of green algae, while brown algae proliferate with high concentrations of silicates.
The possible causes of the increase in phosphate in a pond are various, including the decomposition of dead organisms or vegetation, the decomposition of uneaten food, impurities in the original water or the chemical additives used. The reduction in these phosphates (and secondly the silicates) is therefore a fundamental operation for the correct maintenance of an aquarium. In most cases, the concentration of phosphates are recommended at 0,05 ppm in order to keep the pond free of infesting algae.
The best method of lowering the phosphate and silicate concentration is the treatment of the water with a specific product; REMOVER PO4 & SiO2 POND is made up of Aluminium oxide, in a form and dimension optimized to increase the efficiency of phosphate removal.
Activated granular aluminium (Al2O3 > 90%).
- 100% effective in removing Silicates and Phosphates;
- Acts in a few days;
- It does NOT release aluminum or other unwanted substances.
Insert REMOVER PO4 & SiO2 in its net and rinse with reverse-osmosis water to eliminate residues and dust (the product may liberate plenty of heat the first time it comes into contact with water: use protective gloves and/or place the product in a container or cup for the first rinse). After which place this net in the filter or Sump, ensuring that there is a strong water flow. It is even more effective if used in a filter with fluid bed or in a phosphate reactor. REMOVER PO4 & SiO2 POND , as all absorbent material, is characterized by an maximum absorption capacity and must, therefore, be changed regularly if the phosphate level remains unaltered or lowers very gradually. For this reason it is important to test the phosphate concentration level in the aquarium regularly. Aluminium oxide and Iron hydroxide cannot be regenerated in any way, as phosphates and silicates are removed from the water through the formation of stable complexes on the surface. Therefore, REMOVER PO4 & SiO2 POND, once used, cannot be re-utilized.
CONTAINS: ALUMINUM OXIDE EC 215-691-6.
Keep in a cool and dry place. Keep the product out of the reach of children.
100 g every 100/200 liters of water
| Enter the net Lt of the Pond |
|---|
There are no reviews yet.